PPCleaner

Performance Max Search Terms That Never Convert

Published November 18, 202611 min read
An ecommerce owner and marketer reviewing search-query cards beside products and customer orders.
The short answer

Start with the Performance Max search terms that have cost the most and have intent that can never become a sale: job seekers, DIY, "free", used or spare parts, research-only queries. Block the pattern with a phrase negative where one word carries the bad intent. Use exact match for a single expensive query. Leave relevant terms that simply haven't converted yet. They need more data, not a block.

Order matters because Performance Max takes up to 10,000 campaign-level negative keywords and does not accept shared negative keyword lists. Every negative is added campaign by campaign. Spend those entries on the terms and patterns that cost the most money, not on every zero-conversion line in the report.

Block expensive, wrong-intent terms first

The first terms to block in Performance Max are the ones that check two boxes. They have cost real money with zero conversions, and their wording shows the searcher was never going to buy. "standing desk jobs", "diy standing desk plans" and "used standing desk" all fit if you sell new desks online. A term that is only expensive, or only odd-looking, can wait.

You need both boxes ticked because each one alone misleads. A relevant term like "electric standing desk 60 inch" can go 9 clicks without converting and still be one of your best queries next month. A strange term that cost $2 is not worth the time it takes to judge it. Cost tells you where the money went. Intent tells you whether that money ever had a chance.

Here is a realistic slice of a Performance Max search terms report for an online store that sells new electric standing desks. Target CPA is $120. Every figure covers the same 30 days.

Search termClicksCostConversions
diy standing desk plans140$2100
used standing desk60$1500
standing desk benefits95$1330
standing desk ikea48$960
standing desk motor replacement22$660
standing desk for kids18$360
electric standing desk 60 inch9$270

Total cost with no conversions: $718. Four of these terms carry intent this store can't serve: DIY plans, used desks, research about benefits, and a replacement motor. Together they cost $210 + $150 + $133 + $66 = $559. That is the first block. The other three need a judgment call or more data, and we cover them below.

Why Performance Max forces you to choose

Performance Max does not let you add negatives the way you would in Search. It accepts up to 10,000 negative keywords at the campaign level and does not accept shared negative keyword lists. Each campaign carries its own list, so you maintain the same blocks again and again.

That has three practical effects.

The work multiplies. Say you run four Performance Max campaigns, split by product line, and you want the same 300 negatives in each. With no shared list, that is 1,200 separate entries. Every new pattern you find means four more additions. Every mistake means four fixes.

The cap is real for big catalogues. 10,000 sounds like plenty until you add negatives one exact query at a time. A large store that blocks every odd term as it appears can fill a campaign's list with one-off queries that will never show up again. Then there is no room left for the patterns that matter.

There is less room for slack. In Search you can keep a broad shared list and tidy it later. In Performance Max, a messy list is copied across campaigns and harder to audit. If a block turns out to be wrong, you have to find it in each campaign.

So the question is not "should I block this term?" It is "is this term worth one of my entries, in every campaign where it shows up?" If you have added negatives and still see the same queries, read why Performance Max negative keywords seem not to work before adding more.

A note on Standard Shopping: it does accept negative keywords and shared lists, just like Search. If you run Shopping next to Performance Max, you can manage Shopping's negatives the easy way. Performance Max still needs its own campaign-level entries.

Rank non-converting terms by cost first

Sort the non-converting terms by cost, highest first, and set a cut-off tied to your target CPA. A simple rule works: a term with clear wrong intent is a candidate once it has spent about half your target CPA. A term with unclear intent is a candidate once it has spent more than your full target CPA with no conversion. Below those lines, leave it and look again next month.

With a $120 target CPA, that gives:

  • Clear wrong intent, $60 or more: block now. In the table, "diy standing desk plans", "used standing desk", "standing desk benefits" and "standing desk motor replacement" all pass.
  • Unclear intent, $120 or more: review. Nothing in the table passes yet. "standing desk ikea" at $96 is close.
  • Everything else: keep watching.

These thresholds are a starting point, not a law. Pick your own and write it down so the whole team uses the same line. The point is to stop arguing about $3 terms while a $210 term keeps running.

Don't ignore the long tail

Sorting by cost hides one trap. Dozens of terms that each cost $4 to $10 can add up to more than your top offender, and none of them crosses the threshold alone. The answer is to group them by pattern, not to block them one by one. If thirty low-cost terms all contain "repair", "replacement" or "parts", the pattern has spent real money even if no single term has. We go deeper on this in low volume terms that add up.

To pull these groups out quickly, filter the report for words instead of reading it top to bottom. The search terms report filters that surface waste cover the filters worth saving.

Check where the data comes from

Search terms for Performance Max are reported in campaign_search_term_view, the same view that holds Search and Shopping terms. Display, Video and App report no search terms at all. So the cost you can tie to a query is only part of what a Performance Max campaign spends. If the totals in your report look low next to campaign spend, that gap is not a bug in your analysis. Search terms report missing data and where the cost went explains what you can and can't recover. Also keep in mind that the grouped categories in the insights view are not the same as the raw query list. See Performance Max search term insights are not queries.

The intent patterns that rarely convert

A small set of word patterns explains most of the clearly wasted spend in Performance Max. Each one signals a searcher who wants something you don't sell. Block the pattern once and you cover every future version of it.

Here are the patterns to check first, with examples. Whether each one is waste depends on your business. Read the examples against what you actually sell.

Job and career searches

"standing desk assembly jobs", "furniture company careers", "plumber salary", "warehouse jobs near me". These people want a paycheck, not a product. For almost any advertiser who isn't hiring through ads, words like jobs, careers, hiring, salary and internship are safe phrase negatives.

DIY and how-to

"diy standing desk plans", "how to build a standing desk", "standing desk frame tutorial". The searcher plans to make it themselves. If you sell finished products, these rarely convert. If you sell parts, kits or tools, they may be your best traffic. That is why you check the pattern against your catalogue before you copy it.

Free, cheap and second-hand

"free standing desk", "used standing desk", "standing desk craigslist", "standing desk for sale by owner". A new-only store loses money on these. A store that sells refurbished stock should keep "used" and block "free".

Research without purchase intent

"standing desk benefits", "is standing desk good for back", "standing desk vs sitting". Some of these lead to a sale weeks later, and some never do. They are the hardest pattern to judge. Before you block question-style terms, test them as described in question searches: test before you block.

Repairs, parts and support

"standing desk motor replacement", "flexispot error code e01", "desk won't go up". These are often your own past customers or a competitor's customers looking for help. Unless you sell parts, they cost money and fill your support inbox. For your own brand's support terms, consider a landing page fix as well, because the person is already a customer.

Competitor and retailer names

"standing desk ikea", "standing desk costco". These are not automatically waste. Some shoppers compare before they buy. Treat competitor terms as unclear intent and use the higher cost threshold. Your own brand terms are a separate problem in Performance Max. See how to split brand and non-brand in Performance Max.

Wrong product, wrong audience

"standing desk for kids" in a store that only sells adult sizes. "standing desk converter" in a store that only sells full desks. These look relevant at a glance, which is why they survive for months. Only you know your catalogue well enough to catch them.

What not to block yet

Not every non-converting term deserves a negative. Three kinds of terms should usually be left alone: relevant terms with too little data, terms that converted recently, and terms where the problem is the page, not the query.

Relevant terms with too little data. "electric standing desk 60 inch" cost $27 over 9 clicks. That is exactly what your best buyers search. Zero conversions after 9 clicks tells you almost nothing. Blocking it would remove a query Performance Max needs to find buyers. Check it again when it has spent more than your target CPA.

Terms that converted recently. A term that brought a sale two months ago and nothing since is not a bad term. Conversions are lumpy. PPCleaner never blocks a term that converted in the last 90 days, and that is a sensible rule to apply by hand too.

Terms where the page is the problem. If "standing desk for tall people" gets clicks and no sales, ask whether your landing page shows height ranges. If it doesn't, the query is fine and the page is failing it. Low quality traffic: bad clicks or bad pages walks through how to tell the difference.

There is also a cost to blocking too much. Performance Max uses your conversion data to decide which queries to chase. Junk queries feed it bad signals, as covered in how junk queries skew Smart Bidding. Blocking good queries narrows what it can learn from. You want the list to cut clear waste, not to shape every query by hand.

Campaign goals don't do this filtering for you either. Turning on the new customer goal changes how conversions are valued. It does not stop "diy standing desk plans" from matching. See why the new customer goal won't block bad queries.

Pick the match type that uses the fewest entries safely

Use phrase match negatives for patterns and exact match negatives for single expensive queries. Avoid broad negatives in Performance Max. Phrase match gives you the most coverage per entry. Exact match gives you the most precision. Broad negatives behave unpredictably across match types, so you can't be sure what they will block.

Phrase match for patterns

A phrase negative of jobs blocks "standing desk jobs", "furniture assembly jobs near me" and every future query that contains the word. One entry, endless coverage. That's the best use of a capped list.

The risk is overreach. A phrase negative of used would also block "most used standing desk brand". A phrase negative of kids would block "standing desk kids room" if you do sell a model that fits. Before you add a one-word phrase negative, search your converting terms for that word. If it appears in any of them, use a longer phrase like used standing desk instead. Phrase match negative keyword examples you can copy safely lists patterns that rarely misfire.

Exact match for single expensive terms

When one specific query has burned money and its words also appear in good queries, block it exactly. "standing desk benefits" as an exact negative stops that query but leaves "standing desk benefits for back pain sale" alone. Exact negatives use more entries for less coverage, so save them for terms that cleared your cost threshold. More on that trade-off in exact match negative keywords: the safest block.

Apply it to the example

From the table, a tidy set of entries would be:

  • diy (phrase): covers "diy standing desk plans" and every DIY variant.
  • used standing desk (phrase): covers second-hand searches without touching "most used".
  • motor replacement (phrase): covers repair queries for any desk model.
  • [standing desk benefits] (exact): stops the research query without blocking longer buying queries.

Four entries remove the $559 of the first block. Copy them into each Performance Max campaign where the terms appear. If you run four campaigns, that is 16 entries, still a tiny share of the 10,000 limit in each.

What negatives can't fix in Performance Max

Negative keywords only act on search queries. They can't touch Performance Max spend on Display, Video or App placements, because those channels report no search terms. If your campaign spends heavily outside Search and Shopping, a clean negative list will help less than you expect.

Some other limits to be honest about:

  • You only see what's reported. Negatives can only target queries you can see. Spend on terms that never appear in the report stays out of reach.
  • Brand is a different job. Performance Max picking up your own brand searches is a common problem, but negative keywords are a blunt tool for it. Measure it first with Performance Max branded search spend and how to measure it.
  • Negatives don't fix tracking. If a converting query shows zero conversions because your tag misfires, you will block a good term. Check that conversions are recorded correctly before you trust any "never converted" label.
  • Negatives don't change bids or budgets. Blocking waste frees money. Where that money goes next is up to the campaign. Expect it to flow to other queries, not straight to profit.

How PPCleaner handles Performance Max

PPCleaner reads the search terms your Performance Max, Search and Shopping campaigns paid for, judges which ones were never going to convert, and adds them as negatives every night. In Performance Max it adds them at campaign level, because shared lists aren't accepted there. Standard Shopping and Search can use shared lists as usual.

It follows the same rules this article sets out. It skips any term that converted in the last 90 days. It never changes budgets, bids, ads or keywords. Its only job is negatives. Every block can be undone in one click for 90 days, so a wrong call on a borderline term like "standing desk ikea" costs one click to reverse, not an hour of digging through four campaigns.

It is not a cure for everything above. It can't block what Google doesn't report, it won't fix a weak landing page, and it trusts your conversion tracking. If your tracking is broken, fix that first. Otherwise you are asking any tool, or any person, to judge queries with bad data.

performance maxnegative keywordssearch termswasted spend

Frequently asked

How many negative keywords can a Performance Max campaign have?

Up to 10,000 at the campaign level. Performance Max does not accept shared negative keyword lists, so each campaign needs its own entries. If you run several Performance Max campaigns, you add the same negatives to each one separately.

How much should a Performance Max search term spend before I block it?

Tie the threshold to your target CPA. A workable starting rule: block clear wrong-intent terms (jobs, DIY, free) once they have spent about half your target CPA, and review unclear terms once they pass your full target CPA with no conversion. Adjust it to your account and write it down so everyone uses the same rule.

Should I use broad, phrase or exact negatives in Performance Max?

Use phrase match for patterns like 'jobs' or 'diy', and exact match for single expensive queries whose words also appear in good searches. Avoid broad negatives: they behave unpredictably across match types, and a capped list has no room for blocks you can't predict.

Why do I still see spend I can't link to any search term?

Performance Max search terms are reported in campaign_search_term_view, but only for Search and Shopping inventory. Display, Video and App report no search terms. Spend on those channels won't show up as queries, and negative keywords can't act on it.

Will blocking non-converting terms hurt Performance Max performance?

Blocking clear waste usually gives the campaign cleaner data to learn from. Blocking relevant terms that just haven't converted yet narrows what it can find. Leave relevant low-data terms and anything that converted in the last 90 days alone, and keep negatives for terms that are clearly the wrong intent.

About the author

Alain Abulafya

Founder of PPCleaner · Google Ads consultant & media buyer

Alain has worked in digital marketing for more than 15 years, over 10 of them managing and optimizing Google Ads campaigns. He has worked with more than 100 advertisers in e-commerce and lead generation, and he is a Google Partner. He built PPCleaner to automate the search term reviews he used to do by hand for his clients.

Stop the leak

Clean your search terms. Save time and money.

Every night, PPCleaner reviews the searches your campaigns actually paid for, groups them by intent, and excludes the ones that never convert. No spend threshold to wait for, nothing touched but negatives — and one click undoes any of it.

Start 7 days free

Search, Shopping and Performance Max · Cancel in one click

Related articles

PMax Search Terms Not Converting? What to Block First — PPCleaner