PPCleaner

Performance Max Brand and Non-Brand Split: 4 Methods

Published November 11, 202613 min read
An online retailer reviewing product advertising beside merchandise and shipping packaging.
The short answer

There are four ways to split brand from non-brand in Performance Max: brand exclusions, campaign-level negative keywords, a separate brand Search campaign, and splitting the reporting without changing the campaign. Each one leaks somewhere. Brand exclusions match loosely. Negatives match exactly what you type and nothing else. A brand Search campaign only wins the queries it actually matches. A reporting split changes nothing about where the money goes.

Most accounts need two of these together. Use a brand Search campaign plus either brand exclusions or exact-match negatives in PMax. Then check the PMax search terms every month for brand variants that got through. Before you make the cut, decide what "brand" means for you. Queries like "acme login", "acme vs rival" and your product line names are where every method disagrees.

The short version: four methods, each leaks somewhere

You can split brand from non-brand in Performance Max in four ways. You can attach a brand exclusion list. You can add your brand terms as campaign-level negative keywords. You can run a separate brand Search campaign that takes those queries first. Or you can leave PMax alone and split the numbers afterwards. None of them is airtight. The useful question is not "which one works?" but "which leak can I live with?"

The pages that rank for this topic mostly say the same thing: exclude your brand from PMax and run brand in Search. That is a sound default. It leaves out three things:

  • What counts as "brand" in the first place. This is a decision, not a fact, and it changes what each method catches.
  • How each method matches. Exclusions match loosely, negatives match literally, and Search priority only applies to some queries.
  • What the split does to your reported performance. It will make PMax look worse, and that is expected.

The sections below take those in order.

Decide what "brand" means before you split anything

Before you touch a setting, write down which queries count as brand. The methods below disagree most on the grey areas, so if you skip this step, you can't tell whether the split worked. For an online shoe retailer called Acme, the queries fall into roughly six groups:

QueryGroupUsually treat as
acme, acme shoes, acme.comPure navigationalBrand
acme running shoes womenBrand + productBrand (most accounts)
acme discount code, acme returnsBrand + post-purchase or deal intentBrand, but often low value
acme login, acme careers, acme order statusBrand + non-buying intentJunk, whichever side it lands on
acme vs stride, acme or strideBrand + competitorDebatable
cloudrunner 3 (your own product line)Product name without the brandDebatable
acmee, acme shoe'sMisspellings and variantsBrand

Two of those rows cause most of the arguments.

Product line names. If "cloudrunner 3" is a name only you sell, the person searching it already knows you. That is brand demand. But nothing in the query says "Acme", so brand exclusions may not catch it, and a negative for "acme" won't either. If you leave product names out of your brand definition, PMax keeps them. Its non-brand numbers will then include traffic that was really brand.

Brand + junk. "acme careers" and "acme login" are not non-brand prospects, and they aren't brand customers about to buy either. If you exclude brand from PMax and send it all to Search, these queries move into your brand campaign and make its numbers worse. Splitting brand doesn't clean it. You still need negatives for the junk, on whichever side it ends up. Our guide on negative keywords by intent covers the same split for service businesses, where "brand + jobs" is a common leak.

Write the list down. Put product names, known misspellings and the competitor-comparison queries you want to keep on it. Every method below works from that list.

Method 1: Brand exclusions in Performance Max

A brand exclusion list tells PMax not to serve on searches for the brands on the list. You pick your brand from Google's brand database, or request it if it isn't listed. Google then matches the brand name plus variations and misspellings it recognises. This is the method most guides recommend, and it is the least work to set up.

What it does well:

  • It catches variants you would never type. Misspellings, spacing ("acme shoes" vs "acmeshoes") and foreign-language versions are handled by Google's matching, not your keyword list.
  • One list, many campaigns. You maintain it once at account level and attach it where needed.
  • You don't spend your negative keyword cap on it. Your 10,000 campaign-level negatives stay free for real junk.

Where it leaks:

  • You can't see the matching rules. Google decides what counts as a variant of "Acme". You cannot list what it caught and what it let through. The only check is reading the search terms afterwards.
  • Product names without the brand are not your brand. "cloudrunner 3" isn't "Acme" in Google's database. If your product names are brand demand, the exclusion won't cover them unless the product name is itself a listed brand.
  • Generic-sounding brands. If your brand is a common word, like "Bloom" or "Summit", it is unclear how the exclusion treats "summit hiking boots". You will find out from the search terms, not from the settings.
  • It is all or nothing for the brand. You can't keep "acme running shoes women" in PMax and exclude "acme login". The exclusion takes the whole brand.

Use brand exclusions when your brand name is distinctive and your product names either include it or don't matter much. Check the PMax search terms two to four weeks after you turn it on. Keep in mind that the search term insights view in the PMax interface is not a query list, so pull real terms from the reports or the API before you judge.

Method 2: Campaign-level negative keywords in PMax

You can add your brand terms as negative keywords directly on the PMax campaign. A PMax campaign accepts up to 10,000 campaign-level negative keywords. It does not accept shared negative keyword lists. Negatives give you exact control: they block exactly what you type, in the match type you choose, and nothing else.

That control is the point. Negatives can do things brand exclusions can't:

  • Block "acme" exactly and keep "acme running shoes women". An exact-match negative [acme] takes the navigational query out of PMax. Product-intent brand queries stay in, if that's what you want.
  • Block product names. "cloudrunner" as a phrase negative covers your product line even though Google doesn't treat it as a brand.
  • Block just the junk. "acme careers" and "acme login" can go without affecting the rest of the brand.

The match type matters more here than anywhere else:

  • Exact ([acme], [acme shoes]) is the safest and the narrowest. It misses every misspelling and every longer query you didn't write down.
  • Phrase ("acme") blocks any query that contains the word in that order. That usually means every brand query, which may be more than you meant to cut. Our phrase match negative examples show where this goes wrong.
  • Broad negatives behave unpredictably across match types. Avoid them for brand. A broad negative on a two-word brand can block queries you never expected.

The costs are real:

  • No shared lists in PMax. Each PMax campaign needs its own copy of the brand negatives. If you run five PMax campaigns, you maintain five lists. Standard Shopping does accept shared lists, like Search, so a mixed account ends up with two systems.
  • Misspellings are your job. "acmee", "acme shoe's" and "acmeshoes" each need their own entry, and you only learn about them after they've spent money.
  • Conflicts are silent. A negative "acme" in PMax is fine. The same negative copied into your brand Search campaign by mistake blocks your own brand keywords, and Google won't warn you. See negative keyword conflicts Google Ads won't flag.

If negatives don't seem to hold in PMax, the cause is usually match type or a gap in reporting, not a bug. Performance Max negative keywords not working walks through the usual reasons.

Method 3: A separate brand Search campaign

A brand Search campaign with exact-match brand keywords takes those exact queries ahead of PMax. Google says that when a Search keyword is identical to the query, Search takes priority over Performance Max. This is why "run brand in Search" works at all. It is also why it only partly works.

The priority rule covers queries identical to your exact keywords. "acme" against [acme] goes to Search. For everything else, Search and PMax compete on ad rank and relevance. That includes "acme running shoes for flat feet", a misspelling, or a phrase-match brand keyword matching a longer query. PMax can and does win some of these. So a brand Search campaign with no brand exclusion or negatives in PMax shrinks PMax's brand traffic. It does not remove it.

What a separate campaign gives you that the PMax-side methods don't:

  • Its own budget and bidding. Brand usually needs little budget, and you can bid for impression share instead of letting brand clicks fund a blended target.
  • Ad copy and sitelinks you control for the people who already know you.
  • Clean reporting. Brand cost and conversions sit in their own campaign, with no regex needed.

What it doesn't give you:

  • No effect on PMax without help. You need method 1 or 2 alongside it to close the gaps.
  • No effect on brand + product queries you didn't add. If you add [acme] but not [acme running shoes], the second query is fair game for PMax.
  • No protection from junk. "acme careers" now costs you in Search instead of PMax. Add those negatives to the brand campaign as well.

If you already have a brand Search campaign and still see brand in PMax, compare the two campaigns' search terms side by side. Performance Max cannibalizing Search? Compare the terms shows how.

Method 4: Leave brand in PMax and split the reporting

You can keep PMax as it is and split brand from non-brand in your reports. Pull the search terms from campaign_search_term_view, tag each term as brand or non-brand against your list, and sum cost and conversions for each group. This changes nothing about where money goes. It tells you how much of PMax's result is brand, which is often enough to decide whether you need methods 1 to 3.

A rough version takes an hour:

  1. Pull search terms with cost and conversions for the PMax campaign over 30 to 90 days.

2. Tag a term as brand if it contains your brand, a known misspelling or a product line name. A spreadsheet formula or a regex like acme|acmee|cloudrunner is enough.

  1. Sum cost and conversions for the brand rows and the non-brand rows.
  2. Compare the total with the campaign's full cost. The gap is spend that has no search term attached.

Step 4 is the hard part. Search terms are reported for Search, Shopping and PMax, but PMax also spends on placements that report none. And some search traffic is grouped or hidden for privacy. So brand + non-brand from the terms report will not add up to total PMax spend. You have three buckets, not two: brand, non-brand, and unattributed. Search terms report missing data explains where that third bucket comes from. The fuller measurement method is in Performance Max branded search spend and how to measure it.

Stop at reporting when brand is a small share of PMax search spend, or when your brand converts mostly through organic results anyway. Move to methods 1 to 3 once the brand bucket is large enough to distort the campaign's CPA. The next section shows how that happens.

What the split does to your numbers

Splitting brand out of PMax will raise its reported CPA. That doesn't mean the split failed. Brand queries convert cheaply because those people were already looking for you, so they pull the blended CPA down. Remove them and you see what PMax costs for the work it actually does.

Here is an illustrative month for one PMax campaign:

BucketCostConversionsCPA
Brand search terms$2,000200$10
Non-brand search terms$6,000120$50
No search term (other inventory, hidden terms)$4,00080$50
Total$12,000400$30

On the dashboard, PMax shows a $30 CPA. Without the brand bucket it spends $10,000 for 200 conversions, a $50 CPA. If you judged PMax against a $35 target, it looked like it was beating it. In fact, the part of PMax that finds new customers costs $50.

Three things follow from that:

  • Reset the target before the split, not after. If you exclude brand and leave a tCPA of $30 in place, Smart Bidding will cut volume chasing a number that only existed because of brand. Set it near the non-brand figure and adjust from there. Smart Bidding bad data explains why the bidder learns from whatever conversions you feed it.
  • Expect PMax conversion volume to drop. In this example, 200 of the 400 conversions were brand. Most of them should reappear in your brand Search campaign, at a similar cost per conversion. Check that they do. If brand Search picks up far fewer than PMax lost, some of those "conversions" may have happened anyway, through organic or direct.
  • Judge the account total, not each campaign. After the split, look at brand Search plus PMax together for a few weeks. Total conversions should stay roughly flat. Cost should stay flat or go down. If both drop sharply, a negative or an exclusion is probably blocking something it shouldn't.

A related trap: switching PMax to a new-customer goal doesn't do the same job as excluding brand. Returning customers searching your name can still trigger ads. The new customer goal won't block bad queries covers why.

Which combination to use

Most accounts should combine a brand Search campaign with one PMax-side control, then audit the search terms monthly. Which PMax-side control depends on your brand and your products:

Your situationUseWhy
Distinctive brand name, products named after itBrand Search + brand exclusionGoogle handles misspellings, and your product queries contain the brand
Own product line names people search without the brandBrand Search + exclusion + phrase negatives for product namesThe exclusion won't treat "cloudrunner" as your brand
Want PMax to keep brand + product queriesBrand Search + exact negatives in PMaxOnly negatives can block [acme] and keep "acme running shoes"
Brand is a common wordBrand Search + exact negatives, check terms oftenExclusion behaviour on generic words is hard to predict
Brand is a small share of PMax search spendReporting split only, for nowFewer moving parts. Re-check each quarter
Several PMax campaignsBrand exclusion over negatives where possibleOne list, no copying negatives across campaigns

Whatever you choose, the monthly check is the same. Filter PMax search terms for your brand, its misspellings and your product names. Anything that shows up got past your controls. Add it as a negative, or ask why the exclusion missed it. A 20-minute search terms review is enough if you do it every month.

Where PPCleaner fits, and where it doesn't

PPCleaner is not a brand-splitting tool. It won't create a brand Search campaign, attach a brand exclusion list or move budget between campaigns. It never touches budgets, bids, ads or keywords. If you want brand out of PMax, the decision and the setup are yours.

What it does is the half of the job the split leaves behind. Every night it reads the search terms each campaign paid for, across Search, Shopping and Performance Max. It finds the ones that were never going to convert and adds them as negatives. On the brand side, that means queries like "acme careers", "acme login" or "acme customer service number", wherever they land after your split. In PMax it writes campaign-level negatives, because PMax doesn't accept shared lists. In Search and Shopping it can use either.

Two limits to know about:

  • It won't block a brand term that converted. PPCleaner never blocks a term that converted in the last 90 days. So if "acme" converts in PMax, it stays in PMax until you decide otherwise with an exclusion or a negative. Moving converting brand traffic is a strategy call, not junk removal.
  • It only sees what Google reports. Spend with no search term attached can't be read, so it can't be judged. That third bucket from the example above stays outside PPCleaner's reach, just as it stays outside yours.

Every block can be undone in one click for 90 days. That matters here: after a brand split, a few queries will sit on the wrong side for a while, and fixing them should be cheap.

performance maxbrand exclusionsnegative keywordsbranded searchcampaign structure

Frequently asked

Should I use brand exclusions or negative keywords to keep brand out of Performance Max?

Use brand exclusions if your brand name is distinctive and you want Google to handle misspellings for you. Use negative keywords if you need finer control. For example, use them to block the exact query "acme" but keep "acme running shoes", or to block product line names that Google doesn't treat as your brand. Many accounts use both: the exclusion for the brand name, negatives for product names and gaps you find in the search terms.

Does a brand Search campaign stop Performance Max from showing on brand searches?

Only partly. Google says a Search keyword identical to the query takes priority over Performance Max, so exact brand queries go to Search. Longer brand queries, misspellings and variants you didn't add as keywords can still go to PMax. To close the gap, add a brand exclusion or brand negatives in PMax.

Why did my Performance Max CPA go up after I excluded brand?

Brand searches convert cheaply because those people were already looking for you, so they pull the blended CPA down. Once you remove them, PMax shows its cost for non-brand traffic only. Look at brand Search and PMax together. If total conversions stay roughly flat, the split worked. Lower the PMax target CPA before the split so Smart Bidding doesn't chase a number that only existed because of brand.

Can I add a shared brand negative list to Performance Max?

No. Performance Max doesn't accept shared negative keyword lists. It accepts up to 10,000 campaign-level negative keywords, so each PMax campaign needs its own copy of your brand negatives. Standard Shopping and Search do accept shared lists. If you run several PMax campaigns, a brand exclusion list is easier to maintain than copied negatives.

How do I know how much Performance Max spends on brand before I split it?

Pull the PMax search terms from campaign_search_term_view, tag each term as brand or non-brand against a list that includes misspellings and product names, and sum cost and conversions for each group. Expect a third bucket of spend with no search term attached. Brand plus non-brand won't add up to the campaign total.

Should brand plus competitor searches like "acme vs stride" count as brand?

It's your call, but decide before you split. These people know your brand and are still comparing, so some accounts keep them in a brand campaign with comparison copy and others let PMax handle them. Whichever you choose, put them on your written brand list so your exclusions, negatives and reporting all treat them the same way.

About the author

Alain Abulafya

Founder of PPCleaner · Google Ads consultant & media buyer

Alain has worked in digital marketing for more than 15 years, over 10 of them managing and optimizing Google Ads campaigns. He has worked with more than 100 advertisers in e-commerce and lead generation, and he is a Google Partner. He built PPCleaner to automate the search term reviews he used to do by hand for his clients.

Stop the leak

Clean your search terms. Save time and money.

Every night, PPCleaner reviews the searches your campaigns actually paid for, groups them by intent, and excludes the ones that never convert. No spend threshold to wait for, nothing touched but negatives — and one click undoes any of it.

Start 7 days free

Search, Shopping and Performance Max · Cancel in one click

Related articles

Performance Max Brand and Non-Brand Split, Compared — PPCleaner