Performance Max Brand Cannibalization in Your Search Terms

Export the real Performance Max search terms (not the insight categories), match each one against a full brand list, and split cost and conversions into brand, non-brand and no-term. The brand share of conversions, set against the brand share of spend, tells you how much of the campaign's reported performance came from demand you already had.
A blended CPA of $40 can hide a brand CPA of $12 and a non-brand CPA of $80. Only the non-brand number tells you what Performance Max adds. Get that number first. Then decide whether to exclude brand, and accept that the campaign's reported results will drop when you do.
How to check if Performance Max is claiming your brand searches
Pull the actual search terms Performance Max paid for and match each one against your brand list. Then add up cost and conversions for brand terms, for non-brand terms, and for spend that has no term at all. If brand terms carry a much bigger share of conversions than of spend, a real part of what the campaign reports was demand you already had.
That is the whole method. The rest of this article covers what makes it hard: building a brand list that catches everything, getting real queries instead of categories, and reading the result honestly.
One thing to settle first. "Cannibalization" can mean two things. Performance Max can take brand traffic from your brand Search campaign, which is an overlap problem. Or it can take credit for conversions that would have come through organic results or a direct visit, which is an incrementality problem. The term-matching method below measures how much of Performance Max's reported result sits on brand queries. It does not prove those conversions would have happened without the ad. It gives you the size of the question, and you need that before you can answer it.
Why the usual advice stops short
Most pages on this topic say three things: look at search term insights, add brand exclusions, and check whether your brand Search campaign lost impressions. Each step helps. None of them gives you a number for how much of Performance Max's performance was brand.
Search term insights are categories, not queries. Google groups queries into themes such as "running shoes" or "acme shoes". A category named after a product can hold queries that include your brand name, and a category named after your brand can hold queries that barely mention it. If you add up the categories that look like brand, you will get the wrong figure, and you will not know which way it is wrong. We cover why in Performance Max search term insights are not queries.
Brand exclusions fix the traffic but hide the evidence. Exclude brand and the brand queries stop. You never measured what they were worth, so you cannot explain why the campaign's CPA went up the next week. Your client or your boss will see a campaign that "got worse" the day you made it more honest.
Impression share on your brand campaign only shows overlap. If your brand Search campaign's impression share holds steady, you might conclude Performance Max is not touching brand. But Performance Max can still show on brand variants your brand campaign does not cover: misspellings, brand plus product, brand plus a city. The overlap check misses those.
The method here comes before all three. Measure first, then exclude, so you know what you gave up and why.
Build a brand list that catches more than your name
Your brand list decides the result. If it is too short, brand conversions get counted as non-brand and Performance Max looks better than it is. Write the list before you open the search terms, so the data does not shape what you count as brand.
For a fictional running shoe retailer called Strideline, the list would include:
- The name and its spellings: strideline, stride line, stridelines, stridline, strydeline
- The domain and site words: strideline.com, strideline com, strideline website, strideline login
- Owned product and range names: the Strideline Tempo, Tempo 3, Strideline Trail Pro
- Brand plus a service word: strideline returns, strideline discount code, strideline near me, strideline store hours
- Founder or store names if people search them
Two decisions need care.
Product names that are also generic words. If your bestseller is called "Tempo", then "tempo running shoes" might be someone looking for your shoe or someone looking for a pace-training shoe. Put these in a separate "ambiguous" bucket. Do not force them into brand or non-brand. You will report them on their own line.
Brands you resell. If Strideline sells Nike, then "nike pegasus" is not your brand. It is a product search where you compete with every other retailer. Those terms are non-brand for this purpose, even if they convert well.
Then write matching rules, not just a word list. "Contains 'strideline' or 'stride line' anywhere in the query" catches "strideline tempo 3 womens size 8" in one rule. For misspellings, a few contains-rules usually do more than a long list of exact strings. In a spreadsheet, a column that uses REGEXMATCH (Google Sheets) or a nested SEARCH (Excel) against a pattern like strid(e)?\s?line|stryde is enough.
Get the real search terms, not the categories
Performance Max search terms are available as real queries, with cost and conversions, through the same report that holds Search and Shopping terms. In the Google Ads API that is campaign_search_term_view. It reports terms for Search, Shopping and Performance Max campaigns. Display, Video and App campaigns report none.
Pull at least 30 days, and 60 to 90 if the account is small, so brand conversions are not a handful of rows. Filter to your Performance Max campaigns. For each term you want impressions, clicks, cost, conversions and conversion value.
Then add up the cost of every term you got and compare it with the campaign's total cost for the same period. The two will not match, and the gap matters as much as the terms.
The gap comes from two places:
- Inventory with no search term. Performance Max also buys YouTube, Display, Gmail, Discover and Maps placements. Those clicks never had a query.
- Search queries Google does not show. Some terms are withheld, usually low-volume ones. The cost is spent, but the query never appears. See Google Ads search terms hidden by privacy, and what to do and Search terms report missing data and where the cost went for how big that gap can get and why.
You cannot split the gap into brand and non-brand. Keep it as its own line, labelled "no term", and never spread it in proportion across the other two. Brand queries tend to be high-volume and repeated, so they are more likely to appear in the report than long-tail non-brand queries. Sharing out the gap would quietly push your brand share up or down depending on an assumption you cannot check.
Match, add up, and read the split
Tag every term as brand, ambiguous or non-brand, then build one small table. Here is a worked example for 30 days of a single Performance Max campaign. The numbers are made up to show the method. They are not a benchmark.
| Bucket | Cost | Conversions | CPA |
|---|---|---|---|
| Brand terms | $1,800 | 150 | $12 |
| Ambiguous terms | $600 | 15 | $40 |
| Non-brand terms | $6,600 | 75 | $88 |
| No term (non-search inventory and hidden queries) | $3,000 | 60 | $50 |
| Campaign total | $12,000 | 300 | $40 |
Check the sums: $1,800 + $600 + $6,600 + $3,000 = $12,000, and 150 + 15 + 75 + 60 = 300 conversions. $12,000 divided by 300 is the $40 CPA the Google Ads interface shows.
Here is what the table tells you.
Brand is 15% of spend and 50% of conversions. $1,800 out of $12,000 bought half of everything the campaign reports. The $40 CPA everyone is looking at is mostly that $12 brand CPA pulling the average down.
The non-brand CPA is more than double the reported one. $88 per conversion on terms where someone was not already looking for you. That is close to what Performance Max adds through search. If your target CPA is $50, this campaign is not hitting it on new demand, even though the dashboard says it beats the target easily.
The no-term line is a separate question. $3,000 for 60 conversions at $50 is mostly non-search inventory. Some of those conversions may be remarketing to people who already knew you, which raises the same incrementality question in a different form. You cannot see that from search terms. Say so in the report rather than folding it into either side.
Ambiguous stays ambiguous. Fifteen conversions on "tempo running shoes"-type terms is too few to change the conclusion either way. If that line were large, you would need to resolve it, for example by checking whether those clicks landed on your Tempo product page or on a generic category page.
Use conversion value as well as conversion count if you run on ROAS. Brand buyers often have a different basket size from new customers. A brand share of 50% of conversions might be 40% or 60% of value.
How much of the brand share was really "already yours"
The table shows where Performance Max's conversions sit. It does not show how many of those 150 brand conversions would have happened anyway. Three situations change the answer:
- You run a brand Search campaign with full coverage. Most brand queries Performance Max took would otherwise have gone to that campaign. Google says that when a query matches an exact match Search keyword identically, the Search campaign takes priority. When the query is a variant your brand campaign does not hold as exact match, Performance Max can win it. Treat the brand conversions as mostly moved from one campaign to another, not created.
- You run no brand campaign and rank first organically. Many of those people would have clicked your organic listing. Some would not, especially if competitors bid on your name. The truth sits somewhere between "all of it was free" and "none of it was".
- Competitors bid on your brand. Some brand ad presence protects real sales. That is an argument for a brand Search campaign you control, not for leaving brand inside Performance Max where you cannot see its own CPA.
The only clean way to get the incremental share is a test: exclude brand from Performance Max for a set period and watch total account conversions, not just the campaign's. If account totals barely move while Performance Max's reported conversions fall, the brand conversions were moving around, not being created. Run the test at a quiet time of year, and long enough to cover your normal conversion lag.
Read your brand campaign alongside it
Pull the same 30 days of search terms from your brand Search campaign and put the two lists side by side. You are looking for brand variants that appear only in Performance Max. These are the queries your brand campaign was not covering, which Performance Max picked up.
Typical finds:
- Misspellings your brand campaign never had as keywords
- Brand plus product name ("strideline trail pro 2 review")
- Brand plus support words ("strideline order status", "strideline returns label")
Support queries matter most. Someone typing "strideline order status" is an existing customer. If your conversion action fires on account login or a repeat purchase, Performance Max can record a conversion for a customer service visit. Those rows are often the clearest case of the campaign being paid for something it did not cause.
For the full side-by-side method between the two campaign types, see Performance Max cannibalizing Search? Compare the terms. This article stays on one number: the brand share of Performance Max's conversions.
What to do with the number
If brand terms carry a small share of conversions, say well under a fifth, and the non-brand CPA is near target, leave things alone and recheck each quarter. The campaign is mostly doing what it reports.
If the brand share is large and the non-brand CPA is well above target, you have three options. Each has a cost.
1. Exclude brand from Performance Max. Use brand exclusions or campaign-level negative keywords. A Performance Max campaign accepts up to 10,000 campaign-level negative keywords, but it does not accept shared negative keyword lists, so you add them to each campaign. For brand, exact match negatives are the safest start: "strideline" as exact blocks that query and nothing else. Phrase match "strideline" blocks every query containing it, which is usually what you want for brand but also blocks "strideline vs nike" comparison searches you may want to keep. Avoid broad match negatives here. Broad negatives behave unpredictably across match types, and it is hard to predict what they will catch.
The cost: Performance Max's reported conversions fall and its CPA rises, overnight. In the example above, removing brand takes the campaign from 300 conversions at $40 to about 150 at $68, before any spend shifts. Nothing got worse. The report just stopped counting conversions it did not cause. Warn whoever reads the report before you make the change, not after. If negatives do not seem to hold, Performance Max negative keywords not working? Here's why covers the usual causes.
2. Keep brand in Performance Max but report it separately. If you cannot run a test or the client will not accept a drop in reported conversions, keep the term split as a monthly report line. Judge the campaign on its non-brand CPA. This changes nothing in the account, but it stops budget decisions being made on a blended number. The four ways to set this up are covered in Performance Max brand and non-brand split: 4 methods.
3. Move brand to a Search campaign you control. Exclude brand from Performance Max and make sure a brand Search campaign covers the variants you found, including misspellings and product-plus-brand terms. You keep brand coverage, you see brand CPA on its own, and Performance Max is judged on what it adds.
There is one more cost people forget. Smart Bidding learns from the conversions it is fed. A campaign that has been earning cheap brand conversions has learned that brand-like signals are worth bidding on. Remove brand and bidding has to recalibrate. Expect a few unsettled weeks. The same logic, applied to junk queries instead of brand, is in Smart Bidding bad data: how junk queries skew your bids. And the new customer goal will not fix this for you. It changes how conversions are valued, not which queries the campaign enters, as we explain in Performance Max new customer goal won't block bad queries.
Where PPCleaner fits, and where it does not
PPCleaner reads the search terms your Performance Max, Search and Shopping campaigns paid for every night, and adds negatives for terms that were never going to convert. It will not settle the brand question for you, and that is deliberate.
PPCleaner never blocks a term that converted in the last 90 days. Most brand terms convert, so they are almost never candidates. Excluding your own brand from Performance Max is a strategy decision about attribution, budget and reporting. It is not a judgment that a query is junk, and it should be made by someone who has read the table above.
What PPCleaner does handle is the non-brand side. Once brand is out of the picture and you are judging Performance Max on its non-brand CPA, the junk inside that bucket matters more: "running shoe store jobs", "how to clean running shoes", "strideline sizing chart pdf free" from someone who has already bought. Those terms drag your non-brand CPA up and make Performance Max look worse at finding new customers than it is. Clearing them gives you a cleaner number to judge it on.
PPCleaner cannot see the no-term line. Non-search placements and hidden queries have no term to judge, and no tool can negative-match a query Google never reported. It also does not change budgets, bids or campaign settings, so moving money between your brand campaign and Performance Max stays with you. Every block it adds can be undone in one click for 90 days, which matters if you later decide a term it blocked was worth keeping.
A monthly routine that takes about half an hour
You do not need to rebuild the table from scratch each month. Keep the brand list and matching rules in one sheet, paste in the new export, and let the formulas tag it.
- Export 30 days of Performance Max search terms with cost, conversions and value.
- Paste into the sheet. The brand, ambiguous and non-brand tags fill in automatically.
- Check the untagged terms that converted. New misspellings and new product names show up here first. Add them to the brand rules.
- Write down four numbers: brand share of spend, brand share of conversions, non-brand CPA, and the no-term share of spend.
- Compare with last month. A rising brand share of conversions with flat total conversions usually means Performance Max is leaning further into brand, not finding more buyers.
If the non-brand list is long and you need a fast way through it, how to analyze a search terms report in 20 minutes has a triage order that works for Performance Max exports too.
The figure to watch is the gap between brand share of spend and brand share of conversions. In the example it was 15% against 50%. When that gap is wide, Performance Max's reported CPA mostly reflects your brand's strength, not the campaign's. When it narrows, either brand is out of the campaign or the campaign is finding real new buyers. Either way, you can see which one it is.
Frequently asked
Can I see brand cannibalization in Performance Max search term insights?
Not reliably. Insights group queries into categories, and a category named after a product can contain queries with your brand name in them. Use the actual search terms, from campaign_search_term_view in the API or the search terms report, and match each term against your brand list.
Should I spread the cost with no search term across brand and non-brand?
No. That spend comes from non-search placements and from queries Google does not report. Keep it as a separate line. Brand queries are more likely to be reported than long-tail queries, so sharing the gap out in proportion would skew your brand share in a direction you cannot check.
If I exclude brand from Performance Max, will my total conversions drop?
Performance Max's reported conversions will drop, often sharply. Whether total account conversions drop depends on how many of those brand buyers would have come through your brand Search campaign, organic results or a direct visit anyway. Watch account totals, not just the campaign, for a full conversion cycle after the change.
Which match type should I use for brand negatives in Performance Max?
Start with exact match for the core brand name, then phrase match if you want to remove every query containing it. Phrase match also blocks comparison searches like 'brand vs competitor', so decide whether you want those first. Avoid broad match negatives, which behave unpredictably across match types. Performance Max takes campaign-level negatives (up to 10,000) but not shared lists.
Will PPCleaner block my brand terms in Performance Max?
Almost never. PPCleaner never blocks a term that converted in the last 90 days, and brand terms usually convert. Excluding brand is an attribution and budget decision you make yourself. PPCleaner focuses on non-brand terms that were never going to convert.
Clean your search terms. Save time and money.
Every night, PPCleaner reviews the searches your campaigns actually paid for, groups them by intent, and excludes the ones that never convert. No spend threshold to wait for, nothing touched but negatives — and one click undoes any of it.
Start 7 days freeSearch, Shopping and Performance Max · Cancel in one click
Related articles

Performance Max Wasted Spend on Display: How to Spot It
Performance Max spends across Search, Shopping, Display, YouTube, Gmail and Discover, and negative keywords only reach the first two. Here is how to find the split, judge whether the non-search part is waste, and know what you can actually block.

Performance Max Search Terms That Never Convert
Performance Max gives you a capped set of campaign-level negatives and no shared lists. Here is how to decide which non-converting search terms deserve a slot first, and which to leave alone.

Performance Max Brand and Non-Brand Split: 4 Methods
Every guide says "exclude your brand from Performance Max and run a brand Search campaign." That advice is right but incomplete. Here is what each method actually separates, what it misses, and what happens to your CPA afterwards.
