PPCleaner

Performance Max Wasted Spend on Display: How to Spot It

Published November 22, 202612 min read
An ecommerce owner checking advertising invoices beside a laptop, calculator and packed orders.
The short answer

To see how much Performance Max spends off search, compare the campaign's total cost with the cost of the search terms reported for it in campaign_search_term_view, then check the split in channel reporting where your account has it. The gap is roughly what went to Display, YouTube, Gmail, Discover and Maps, plus search terms Google didn't show you.

Spending on Display isn't automatically waste. Judge each channel by its own conversions. And keep in mind that negative keywords only control the search side. They can't cut a dollar of Display or YouTube spend, so treat the two problems with different tools.

Performance Max spends off search, and negatives only reach the search part

A Performance Max campaign buys inventory on Search, Shopping, Display, YouTube, Gmail, Discover and Maps from one budget. Negative keywords only control the search side: Search and Shopping placements, triggered by a query. When a PMax campaign spends $2,000 on Display banners and YouTube pre-roll, no negative keyword you add will move that number.

Most articles on PMax waste don't separate these two problems. They say "add negatives, add brand exclusions, check placements" as one list. Those are different tools for different inventory. You need to know how much of the budget sits on each side before you choose one. If 70% of a campaign's spend runs on search inventory, a good negative keyword list is your main lever. If 70% runs on Display and YouTube, cleaning search terms will barely change the bill, and you'll need to look at assets, placements and whether PMax is the right campaign type for this account at all.

Here's the order that works:

  1. Measure how much spend has a search term attached and how much doesn't.
  2. Split the part without a search term by channel.
  3. Judge each channel on its own conversions, not the campaign average.
  4. Use negatives on the search side. Use other tools, or a different campaign structure, on the rest.

Measure the gap between campaign cost and search term cost

The fastest estimate of non-search spend is a subtraction. Take the campaign's total cost for a period. Subtract the summed cost of every search term reported for that campaign in the same period. What's left is the cost Google didn't tie to a visible query.

Search terms for Search, Shopping and Performance Max are reported in campaign_search_term_view. Display, Video and App campaigns report none, and the Display and YouTube portion of a PMax campaign doesn't produce query rows either. So you can pull the per-term cost from that view through the API or a script, sum it per campaign, and set it next to campaign cost.

A worked example, last 30 days, one PMax campaign:

LineCost
Campaign total cost$6,000
Sum of cost across reported search terms$3,600
Gap (no search term attached)$2,400

So 40% of this campaign's spend, $2,400 of $6,000, has no query you can read or block.

What the gap contains, and why it overstates non-search spend

The gap isn't purely Display and YouTube. It holds two things:

  • Non-search inventory. Display, YouTube, Gmail, Discover and Maps. None of it is triggered by a query, so none of it has a search term row.
  • Search spend Google didn't itemise. Some search terms aren't shown in reporting, usually low-volume queries held back for privacy. That cost is still search spend, but you can't see the query behind it.

So the subtraction gives you a ceiling on non-search spend, not an exact figure. If you want to know how large the hidden-search part tends to be and where it goes, search terms report missing data and where the cost went covers it in detail. For now, read the gap as "non-search, plus some search I can't see".

Don't fill this gap with search term insights either. The PMax insights report groups queries into themes and categories. It doesn't list the queries you paid for, and its numbers aren't meant to add up to campaign cost. Performance Max search term insights are not queries explains why that report is the wrong input for this sum.

Split the gap by channel before you call it waste

Once you know the size of the gap, the next question is where it went. Use channel-level reporting for Performance Max if your account has it. Otherwise, rebuild the picture from placement and asset data. The point is to give each channel its own cost and its own conversions.

Google has been adding channel-level breakdowns to Performance Max reporting. Where you have them, they're the most direct view: cost, conversions and conversion value per channel for the same campaign and date range. Interfaces change and rollouts vary by account, so check what your account shows rather than relying on a screenshot from someone else's.

Continuing the example, suppose the channel view splits the $2,400 gap like this:

ChannelCostConversionsCost per conversion
Search + Shopping (with reported terms)$3,60040$90
Display$1,5003$500
YouTube$7002$350
Gmail + Discover$2000—
Total$6,00045about $133

The campaign average, about $133 per conversion, hides the whole story. The search side converts at $90. Display costs more than five times that. Gmail and Discover haven't produced a conversion at all in this window. Bidding looks at the blended result, and if $133 is within your target, nothing in the campaign view tells you anything is off.

If you don't have a channel breakdown

You can still get most of the way:

  • Placement reporting. Performance Max shows where ads appeared on the Display network and YouTube. It's often thin on cost detail, but it tells you which sites, apps and channels are in play. Mobile games and kids' video channels at the top of the list are a signal, not proof.
  • Asset group and asset reporting. If you uploaded no video, Google can generate one from your images and text. Spend on YouTube with only auto-generated video is worth questioning.
  • The subtraction itself, over time. If the gap grows from 25% to 50% of campaign cost over two months while conversions stay flat, budget has shifted off search. You don't need a channel report to see that trend.

Judge each channel on its own conversions, with honest caveats

A channel is wasting money when its cost per conversion, measured on the same conversion actions you bid on, is far outside what the business can pay, and has stayed there for long enough to mean something. Showing up on Display doesn't make it waste. Display that converts at your target is simply a cheaper source of customers than you expected.

Three things make this judgement harder than the table above suggests.

View-through and engaged-view conversions

Display and YouTube can be credited with conversions from people who saw or watched an ad without clicking. Depending on your conversion settings and attribution model, those can flatter the non-search channels or, if excluded, make them look worse than they are. Before you compare $90 against $500, check which conversion types each number includes. A fair comparison uses the same primary conversion actions and the same counting for every channel.

Small numbers

Three conversions on Display in 30 days is a tiny sample. One more or one fewer changes the cost per conversion by a third. Use a longer window, 60 or 90 days, before deciding a channel is dead weight, especially in lead generation where volumes are low.

Conversion quality

For lead gen, a form fill from a Display placement in a mobile game isn't worth the same as one from a search for "emergency plumber near me". If your CRM shows Display leads rarely becoming customers, the true cost per customer is worse than the table shows. If you can import offline conversions or qualified-lead stages, the channel comparison gets much more honest. If you can't, at least sample the leads by source by hand.

Once you've corrected for these, you usually end up in one of three places:

  • Non-search converts acceptably. Leave it. Focus your effort on the search side.
  • Non-search converts badly but is a small share. Note it and watch the trend. Fix the search side first, because that's where you have the most control.
  • Non-search converts badly and is a large share. This is a structural problem, and it won't be solved with negative keywords. The section below covers the levers.

What negative keywords can do for the search side of PMax

On the search side, negatives work as they do elsewhere: you add the query you don't want, and the campaign stops serving on it. In the example, the $3,600 with reported search terms is the only money in this campaign a negative keyword can reach.

Limits you need to know:

  • A Performance Max campaign accepts up to 10,000 campaign-level negative keywords.
  • It doesn't accept shared negative keyword lists. Every negative is added to the campaign directly. If you run several PMax campaigns, you maintain each list separately.
  • Standard Shopping accepts negative keywords and shared lists, like Search. If you run Shopping alongside PMax, the two are managed differently.
  • Broad, phrase and exact are the three negative match types. Broad negatives behave unpredictably across match types, so in PMax, where the match logic is opaque, exact and phrase are the safer choices. Exact match negative keywords: the safest block goes through when exact is enough and when it isn't.

Back to the example. Reviewing the $3,600 of reported terms, you find:

Search termCostConversions
"plumber salary"$1800
"how to become a plumber"$1400
"plumbing apprenticeship"$1100
"free plumbing advice"$700
Total clearly wasted$5000

That $500 is about 14% of the search-reported spend ($500 of $3,600) and about 8% of the campaign total ($500 of $6,000). Both numbers are true. Which one you quote changes how important the fix sounds. Report the first when you're talking about query quality and the second when you're talking about the campaign budget. For which PMax queries tend to land in this bucket, see Performance Max search terms that never convert.

Why cleaning the search side still matters when Display is the bigger problem

Junk queries don't just cost their own clicks. A click on "plumber salary" that never converts is a data point Smart Bidding learns from. Over hundreds of such clicks, the bidding model gets a worse picture of what a valuable search looks like. Smart Bidding bad data: how junk queries skew your bids covers the mechanism. Removing them improves the signal even if the dollar amount looks modest.

The catch: blocked search budget can move to Display

This is the uncomfortable part, and few guides mention it. Performance Max spends from one budget. When you block $500 of search queries, the campaign doesn't necessarily spend $500 less. It can find other inventory to fill that budget, and the other inventory may well be Display or YouTube. If those channels convert worse than the queries you blocked, you've traded visible waste for invisible waste.

This isn't a reason to skip negatives. It's a reason to measure the gap again two to four weeks after a large batch of blocks. If campaign cost held steady, the search-term sum dropped and the gap widened, budget has moved off search. In that case, look at the budget itself, the target CPA or ROAS, or the non-search levers below. Don't assume the job is done.

Levers for the non-search part, and their costs

For Display, YouTube and Gmail spend inside PMax, your controls are indirect. Each one has a trade-off, and none of them works like a negative keyword.

  • Account-level placement exclusions. You can exclude specific websites, apps and YouTube channels at account level, and Performance Max respects them. This handles the worst placements. It doesn't change how much the campaign wants to spend on Display overall. Expect to keep adding to the list.
  • Content suitability settings. These exclude categories of content and types of inventory at account level. They're useful against obvious low-quality inventory. Excluding too broadly can make the campaign struggle to spend, or push it to bid harder on what's left.
  • Your own assets. Upload real video. If you don't, Google may generate video from your images and text, and that video still runs on YouTube. Good assets won't take the campaign off YouTube, but they make the spend there more likely to work.
  • Conversion goals that reflect value. If Display leads are worth less, tell the system. Import offline conversions or use value-based bidding so a junk lead counts for less than a sale. The new customer goal is a separate setting and doesn't filter bad queries or bad placements. Performance Max new customer goal won't block bad queries explains why.
  • Campaign structure. If the non-search part keeps failing after the fixes above, the honest answer can be to move budget out of PMax. Run Search and Standard Shopping, where you have shared negative lists and see more of the query data, and keep PMax smaller or switch it off. You lose some reach and automation. You gain control.

Some advertisers run Performance Max with a product feed and few or no creative assets, hoping to keep it close to Shopping. That can shift the mix, but Google doesn't promise it, so measure the gap before and after rather than trusting the setup.

Two common Display problems are worth checking at the same time. Accidental mobile taps inflate click counts without intent, and Google Ads accidental clicks on mobile and what to cut shows how to spot them. Brand searches captured by PMax can make the search side look better than it is, which flatters the comparison against Display. Separate them first with one of the Performance Max brand and non-brand split methods.

Where PPCleaner fits, and where it doesn't

PPCleaner works on the search side only. Every night it reads the search terms reported for your Search, Shopping and Performance Max campaigns, judges which ones were never going to convert, and adds them as negative keywords. In the example, that means the $3,600 with reported terms. It can't see or block anything in the $2,400 gap, because Display, YouTube and Gmail produce no search terms to read.

What it handles within that limit:

  • PMax negative limits. It adds negatives at campaign level, since PMax doesn't accept shared lists, and works within the 10,000-negative ceiling.
  • Converting terms stay live. It never blocks a term that converted in the last 90 days, so a query like "boiler repair cost" that sometimes turns into a job isn't cut because most of its clicks didn't.
  • Undo. Every block can be reversed in one click for 90 days. That matters when the budget-shift problem above appears and you want to test whether a set of blocks pushed spend to Display.
  • Nothing else changes. It doesn't touch budgets, bids, ads or keywords. Channel mix, placement exclusions and asset decisions remain yours.

So the work splits cleanly. Let the nightly search-term cleanup run. Once a month, redo the subtraction (campaign cost minus search-term cost), split the gap by channel, and judge each channel on its own conversions. For context on how large "normal" waste is before you set targets, see average Google Ads wasted spend per month, reconsidered.

The monthly check takes about ten minutes once the query is set up:

  1. Campaign cost for the period.
  2. Sum of search-term cost from campaign_search_term_view.
  3. Gap, in dollars and as a share of cost. Compare with last month.
  4. Channel split of the gap, with conversions per channel.
  5. If the gap grew after a round of negatives, check whether the budget moved to non-search inventory.

You can only start cutting waste on Display once you've worked out how much of your Performance Max budget sits there.

performance maxwasted spenddisplaychannel reportingnegative keywords

Frequently asked

Can negative keywords stop Performance Max spending on Display or YouTube?

No. Negative keywords only apply to inventory triggered by a search query, meaning Search and Shopping placements. Display, YouTube, Gmail and Discover placements aren't triggered by queries, so a negative keyword has no effect on them. For those you need account-level placement exclusions, content suitability settings, better assets or a different campaign structure.

How do I estimate how much of my PMax budget goes to non-search inventory?

Subtract the summed cost of all search terms reported for the campaign in campaign_search_term_view from the campaign's total cost for the same period. The remainder is mostly Display, YouTube, Gmail, Discover and Maps, plus search spend on queries Google didn't itemise. Treat it as an upper bound and confirm the split with channel-level reporting where your account has it.

Is Performance Max spend on Display always wasted?

No. Display spend is only waste if its cost per conversion, measured on the same conversion actions and counting as the other channels, is far beyond what the business can pay over a meaningful period. Check whether view-through or engaged-view conversions are included, use a 60 to 90 day window when volumes are small, and look at lead quality, not just lead count.

If I block wasteful search terms in PMax, will the campaign spend less?

Not necessarily. Performance Max spends one budget across all channels, so budget freed from blocked queries can move to other inventory, including Display and YouTube. Re-measure two to four weeks after a large batch of negatives. If total cost held steady while search-term cost dropped, budget has shifted off search, and you should look at the budget, targets or non-search controls.

Can PPCleaner see Performance Max Display and YouTube spend?

No. PPCleaner reads search terms, and Display, YouTube and Gmail placements produce none. It handles the search side of PMax, adding campaign-level negatives within the 10,000 limit and never blocking a term that converted in the last 90 days. Channel mix and placement decisions remain yours.

About the author

Alain Abulafya

Founder of PPCleaner · Google Ads consultant & media buyer

Alain has worked in digital marketing for more than 15 years, over 10 of them managing and optimizing Google Ads campaigns. He has worked with more than 100 advertisers in e-commerce and lead generation, and he is a Google Partner. He built PPCleaner to automate the search term reviews he used to do by hand for his clients.

Stop the leak

Clean your search terms. Save time and money.

Every night, PPCleaner reviews the searches your campaigns actually paid for, groups them by intent, and excludes the ones that never convert. No spend threshold to wait for, nothing touched but negatives — and one click undoes any of it.

Start 7 days free

Search, Shopping and Performance Max · Cancel in one click

Related articles

PMax Wasted Spend on Display and YouTube: Find the Split — PPCleaner