PPCleaner

Google Ads Search Partners Wasted Spend: Read the Terms

Published November 12, 202612 min read
An ecommerce owner checking advertising invoices beside a laptop, calculator and packed orders.
The short answer

Search Partners can waste money, but a CPA average won't show you where. Segment your Search campaigns by network, then read the search terms behind the partner cost. Sort each term into one of four groups: junk only on partners, junk on both networks, good terms, or cost with no visible term.

Turning partners off fixes only the first group. Junk that shows up on both networks is a negative keyword problem, and it keeps costing you on Google Search after you uncheck the box. Clean the terms first. Then judge partners on cost per qualified conversion, not on raw CPA.

What Search Partners actually changes in your account

Search Partners is a checkbox in a Search campaign's network settings. When it's on, your ads can show on sites outside Google Search. Google describes these as hundreds of non-Google websites, plus YouTube and other Google sites. New Search campaigns have the box checked by default. Many accounts serve partner traffic without anyone ever deciding to.

Three things about partner traffic matter for spend:

  • Your keywords and negatives still apply. A partner click still comes from a search query. That query is matched against the same keywords and blocked by the same negatives as on Google Search. You can't set negatives that apply to partners only.
  • The search box is different. A search on a partner site often happens inside a site search, a results widget or an embedded box. The person may be in a different frame of mind from someone typing into google.com.
  • Reporting is thinner. You can split cost and conversions by network. But a larger share of partner cost can sit outside the visible search terms, and there is less detail about where the ad appeared.

So the setting doesn't create a separate pool of keywords. It sends the same keywords into more auctions, on sites you have less visibility into. That's why it can quietly waste money. It's also why the usual fix tends to miss the real problem.

Why "just turn it off" is incomplete advice

Turning off Search Partners is the right call in some accounts. As blanket advice, though, it skips the step that tells you why partners performed badly. Very often the reason is search terms that are wasting money on Google Search as well.

Most of the pages ranking for this topic follow the same pattern. Someone sees a poor CPA or junk leads on partners, unchecks the box, and CPA improves. That story is true as far as it goes. It leaves out three things.

First, the bad terms don't stay on partners. Say your plumbing campaign pays for "plumber salary" or "plumbing apprenticeship" on a partner site. Those terms got through because your keywords match them and no negative blocks them. Google Search will match them too. Turning partners off cuts off one place the money leaks out. The cause is still there.

Second, a CPA average can flatter partners as easily as it condemns them. Partner traffic can bring in form fills that count as conversions but never turn into customers. If you only compare CPA, partners can look better than Google Search while bringing you almost no business. The ranking articles about "$78K of junk leads" describe exactly that: the conversion count looked fine and the leads weren't.

Third, turning partners off doesn't apply everywhere. Performance Max has no Search Partners checkbox. If you run PMax next to Search, some partner-style inventory stays in your account whatever you do in Search. Search term discipline is the only lever that works across all of it.

The useful question isn't "is Search Partners good or bad?" It's "which search terms did the partner money go on, and what happened after the click?"

How to isolate Search Partners traffic by network

Segment by network at the campaign level first. Then do the same in the search terms report. The first shows how much money is involved. The second shows what it was spent on.

Step 1: Size the partner spend

In the Campaigns view, open Segment → Network (with search partners). Each Search campaign splits into rows for Google Search and Search Partners. Use a date range long enough to include a meaningful number of conversions. For most lead-gen accounts that means at least 60 to 90 days.

Write down, per campaign:

  • Partner cost and partner share of total cost
  • Partner conversions and conversion value
  • Partner click-through rate and conversion rate, next to the Google Search figures

If partners account for a tiny share of cost in a campaign, the rest of this exercise may not be worth your time there. Go to the campaigns where partner cost is a real line item.

Step 2: Segment the search terms

Open the search terms report for the same campaigns and date range, and apply the same network segment. Each term now shows separately for Google Search and Search Partners. Export it. You'll want to sort and filter by more than one column.

If you pull data through the Google Ads API, search terms for Search, Shopping and Performance Max are in campaign_search_term_view. Add the network segment to your query and you get the same split. Display, Video and App campaigns report no search terms, so they don't belong in this exercise.

Step 3: Reconcile the totals

Add up the cost of all partner search terms you can see. Compare that with the partner cost from Step 1. The gap is partner money spent on queries Google didn't show you. Do the same for Google Search. If the partner gap is much wider than the Search gap, take that into account when you judge partners. We cover where hidden cost comes from in Search Terms Report Missing Data and Where the Cost Went.

Judge Search Partners by search term quality, not CPA averages

Sort partner spend into four groups of search terms, then check how good the conversions are. A partner CPA only means something once you know which group the money went to.

The four groups

  1. Partner-only junk. Terms that cost money on partners and barely appear on Google Search. Example: odd fragments like "plumber near me phone number free" or terms that look scraped from on-site search boxes. Negatives remove these. They're also the one thing turning partners off would fix.
  2. Shared junk. Terms that waste money on both networks. "plumber salary", "plumbing course online", "how to fix a leaking tap yourself". These are a negative keyword problem. They're the main reason "turn it off" falls short.
  3. Good terms. "emergency plumber", "boiler repair near me", "blocked drain [city]". If these convert on partners at an acceptable cost, partners are helping you.
  4. Unseen cost. The gap you measured in Step 3. You can't add negatives for queries you can't see. All you can do is weigh the risk.

Put each term with spend into one of the four groups. The 20-minute search terms review works the same way here. You just run it once per network.

Example: partners that look worse than they are

Take a Search campaign for a plumbing company over 90 days.

  • Google Search: $4,000 cost, 40 conversions, $100 CPA
  • Search Partners: $600 cost, 2 conversions, $300 CPA

Read on its own, the $300 CPA says turn partners off. Now read the partner search terms. $400 of the $600 went on three terms: "plumber salary", "plumbing jobs near me" and "free plumbing course". The same three terms cost money on Google Search too, just less of it.

Block the three terms with negatives. The remaining partner spend is $200 for 2 conversions, a $100 CPA, the same as Google Search. If you had simply turned partners off, you'd have kept paying for those three terms on Google Search with nothing to show for it.

Example: partners that look better than they are

Same kind of campaign, different account.

  • Google Search: $4,200 cost, 42 conversions, $100 CPA
  • Search Partners: $800 cost, 10 conversions, $80 CPA

On CPA, partners win. Now go to the CRM or the call log. Of the 42 Google Search leads, 25 were real jobs. Of the 10 partner leads, 2 were. Some were spam form fills and some were people looking for a job.

  • Google Search: $4,200 ÷ 25 = $168 per qualified lead
  • Search Partners: $800 ÷ 2 = $400 per qualified lead

Partners now cost more than twice as much per real customer. The search terms often show you why. Partner conversions cluster on vague terms, on terms with no service intent, or on cost you can't see at all. If you can't link conversions to lead quality, you can't make this comparison. At that point, a partner CPA lower than Google Search should make you suspicious, not reassured.

This matters for bidding too. If junk partner form fills count as conversions, Smart Bidding learns that those auctions pay off and bids more on them. We explain how that feedback loop works in Smart Bidding Bad Data: How Junk Queries Skew Your Bids.

Signs a term is partner-specific junk

Some patterns turn up more often on partner traffic than on Google Search in the accounts we audit:

  • Queries that read like a site's own navigation or category labels rather than something a person typed
  • Long strings of joined keywords with no natural word order
  • Brand-plus-category combinations for sites unrelated to you, which look like a directory's internal search
  • Clicks with a very short time on site and no scroll, across many unrelated terms

None of these prove fraud. Some are just low intent. If you think the clicks themselves are invalid, rather than just poor, that's a separate route. See what an invalid clicks refund actually gets you. And if good-looking terms still don't convert on either network, the problem may be the landing page rather than the traffic. Bad clicks or bad pages walks through how to tell which.

Clean, cut or keep: making the call per campaign

Once you've grouped the terms, the choice is usually clear. Block shared junk first, whatever you decide about partners. Then turn partners off only where the remaining partner traffic still can't earn its cost.

Step 1, always: block shared junk

Shared junk wastes money on Google Search whether partners are on or off. Add negatives for it first. Phrase match is usually the safest default for job, training and DIY terms. "salary", "jobs" and "course" are short and rarely appear in a real buyer's query for a service. Use exact match where a word is risky because it appears in good queries too. Phrase match negative keyword examples has lists you can adapt. For service businesses, negatives grouped by intent covers the usual job-seeker, DIY and research traffic.

Avoid broad negatives here unless you've checked them. Broad negatives behave unpredictably across match types, and a broad negative chosen in a hurry can block good queries on both networks.

Step 2: block partner-only junk

These terms rarely have a good version on Google Search, so negating them costs little. Because negatives apply to both networks, check the term's Google Search rows before you add it. If the same words convert on Google Search, use a narrower exact negative or leave it.

Step 3: re-measure, then decide

Give the cleaned campaign another few weeks. A month is a reasonable minimum for most lead volumes. Then compare cost per qualified conversion by network again.

  • Keep partners if they now deliver qualified conversions at a cost close to Google Search, or if they add volume at a margin you can live with.
  • Turn partners off in that campaign if qualified conversions are still far more expensive, or if most partner cost sits in the unseen group you can't manage.
  • Split by campaign, not account. Partners can work for a high-intent emergency campaign and fail for a broad research campaign in the same account. The checkbox is per campaign, so use it that way.

What turning partners off costs you

Turning partners off isn't free. You lose any partner conversions that were real. Your Smart Bidding campaigns also lose some auction volume, which can push CPCs up on Google Search if you were budget-limited and now compete for fewer clicks. That's a reasonable trade if partners were clearly bad. It's a poor trade if the only problem was three unblocked job-seeker terms.

Search Partners in Shopping and Performance Max

Standard Shopping has its own Search Partners checkbox and supports negatives and shared lists, so the method above works as it is. Performance Max has no partner opt-out and no shared negative lists. There, the search terms are your only control.

Standard Shopping

Shopping campaigns accept negative keywords and shared negative keyword lists, the same as Search. Segment by network, read the partner search terms, and sort them into the same four groups. Shopping junk looks different. Expect terms like "free [product] pattern", "[product] repair manual" or a competitor's model number you don't stock. The order of work stays the same. Block shared junk, block partner-only junk, then decide on the checkbox.

Performance Max

Performance Max gives you no switch for partner inventory. The way to limit wasted spend there is negative keywords. A PMax campaign accepts up to 10,000 campaign-level negative keywords. It doesn't accept shared negative keyword lists, so negatives you keep in a shared list for Search won't protect PMax automatically. You have to add them to each PMax campaign.

Search terms for PMax are reported in campaign_search_term_view, the same as Search and Shopping. Don't confuse them with search term insights, which group queries into themes. Search term insights are not queries explains the difference. If you've added negatives and PMax still seems to serve on the same junk, Performance Max negative keywords not working covers the usual reasons.

For accounts where PMax and Search run side by side, this is the strongest argument against treating Search Partners as an on/off question. Turn partners off in Search and the shared junk can keep spending through PMax. Negatives on both campaign types reach it. The checkbox doesn't.

What PPCleaner does here, and what it doesn't

PPCleaner reads the search terms your account paid for across Search, Shopping and Performance Max every night. It adds negative keywords for the terms that were never going to convert. It doesn't touch your network settings, budgets, bids, ads or keywords. Whether partners stay on is still your decision.

In practice, it handles groups 1 and 2: partner-only junk and shared junk. Since a negative applies to both networks, one block on "plumber salary" stops it on Google Search, on partners and, as a campaign-level negative, in PMax. Every block can be undone in one click for 90 days. If a term was good on one network after all, you can bring it back without searching through change history.

It has three limits you should know about.

  • It can't block what Google doesn't show. Partner cost with no visible search term (group 4) is out of reach for PPCleaner and for anyone else. For more on that gap, see search terms hidden by privacy.
  • It won't block a term that converted in the last 90 days. That's a deliberate safety rule. It also means a term that keeps producing junk form fills that count as conversions will keep running. If partner conversions are junk, fix the conversion tracking or import offline lead quality first. Until you do, any automated system, Smart Bidding included, will treat those conversions as real.
  • It doesn't judge partners as a channel. It judges search terms. The decision on the second example above, cost per qualified lead by network, needs your CRM data and your judgment.

If your partner CPA looks bad and you haven't read the partner search terms yet, read them before you change anything. For the broader version of this habit, see CPA too high? Check search terms first. If you're getting clicks but no sales on either network, read the queries first.

search partnerswasted spendsearch termsnegative keywordsnetwork settings

Frequently asked

Should I turn off Google Search Partners?

Sometimes, but not first. Segment your campaigns by network and read the partner search terms. Block the junk terms that also appear on Google Search, wait a few weeks, then compare cost per qualified conversion by network. Turn partners off in campaigns where they're still clearly worse. That's a decision for each campaign, not the whole account.

Can I add negative keywords for Search Partners only?

No. Negative keywords apply to the campaign, so they block the term on both Google Search and Search Partners. Before you negate a term you saw on partners, check whether the same term converts on Google Search. If it does, use a narrower exact match negative or leave it alone.

Can I opt out of Search Partners in Performance Max?

No. Performance Max has no Search Partners checkbox. Your control there is campaign-level negative keywords, up to 10,000 per campaign. PMax doesn't accept shared negative keyword lists, so you have to add the negatives to each PMax campaign directly.

Why does my Search Partners CPA look better than Google Search?

Look at lead quality before you trust it. Partner traffic can bring in form fills that count as conversions but don't turn into customers. Compare cost per qualified lead using your CRM or call log. A low partner CPA backed by junk conversions also teaches Smart Bidding to bid more on those auctions.

Why don't partner search terms add up to partner cost?

Google doesn't show every search term, and the hidden share can be larger on partners than on Google Search. Add up the cost of the partner terms you can see and compare it with the partner cost in the campaign report. A large gap is cost you can't manage with negatives, so weigh it when you decide whether to keep partners.

About the author

Alain Abulafya

Founder of PPCleaner · Google Ads consultant & media buyer

Alain has worked in digital marketing for more than 15 years, over 10 of them managing and optimizing Google Ads campaigns. He has worked with more than 100 advertisers in e-commerce and lead generation, and he is a Google Partner. He built PPCleaner to automate the search term reviews he used to do by hand for his clients.

Stop the leak

Clean your search terms. Save time and money.

Every night, PPCleaner reviews the searches your campaigns actually paid for, groups them by intent, and excludes the ones that never convert. No spend threshold to wait for, nothing touched but negatives — and one click undoes any of it.

Start 7 days free

Search, Shopping and Performance Max · Cancel in one click

Related articles

Search Partners Wasted Spend in Google Ads: A Better Test — PPCleaner